BLOGS-Botou Ruitai Die Casting Co., Ltd.

Die Casting Porosity: Vacuum, Squeeze Pins and Honest Specifications

Why die castings contain porosity, what vacuum assistance and squeeze pins actually remove, when impr...

2026-09-30

Aluminum Die Cast Housings for Instruments and Metering Devices

How aluminum die cast housings serve instrumentation and metering: dimensional stability over service...

2026-09-30

Die Casting from Prototype to Volume: Planning the Ramp

How a die casting program moves from sample to volume: prototype routes and their limits, what to mea...

2026-09-30

Die Cast Aluminum Parts in Robotics and Automation Equipment

Why die cast aluminium suits robotics and automation equipment: moving mass and cycle time, joint and...

2026-09-27

Die Casting Tooling and Mold Maintenance: What a Die Has to Survive

How die casting tooling is specified, cooled and maintained: tool steel selection, thermal balance, g...

2026-09-26

Thin-Wall Aluminum Die Casting: How Far the Wall Can Go

What thin-wall aluminum die casting can actually achieve in production: realistic minimum wall thickn...

2026-09-24

Die Cast Housings for Security and Surveillance Equipment

What a die cast housing must deliver in security and surveillance equipment: ingress protection, heat...

2026-09-22

Recycled Aluminum in Die Casting: What Changes and What Does Not

How recycled aluminium works in die casting: why secondary metal is already standard, where recycled ...

2026-09-22

Common Die Casting Defects: Causes, Prevention, and Quality Control

A practical look at the most common die casting defects, including porosity, cold shuts, flash, and s...

2026-08-27

Aluminum vs Zinc Die Casting: How to Choose the Right Material

A side-by-side comparison of aluminum and zinc die casting covering weight, strength, cost, tolerance...

2026-08-27

Precision and Tolerance in Die Casting: Achieving Dimensional Accuracy

What tolerances you can expect from die casting, how draft, shrinkage, and machining affect accuracy,...

2026-08-27

How to Choose a Die Casting Supplier: A Practical Checklist for Buyers

What to evaluate when selecting a die casting supplier, including capability, quality systems, commun...

2026-08-27